Cold Air Intake for Dodge Charger 5.7 HEMI: 4 Picks

5.7 hemi cold air intake horsepower gains, cold air intake, cold air intake for dodge charger 5.7 hemi, cold air intake installation tips, oiled vs dry air filter for hemi -

Cold Air Intake for Dodge Charger 5.7 HEMI: 4 Picks

Quick Summary

A cold air intake for the Dodge Charger 5.7 HEMI swaps the stock airbox for a tube and filter that pulls cooler air from outside the hot engine bay. Real-world horsepower gains are modest, typically a few horsepower to low double digits, with sound and throttle feel as the bigger benefits. The K&N 50-1542 NextGen is listed as requiring no tune.

  • Independent dyno testing reported gains of +11.8 horsepower and +14.5 lb-ft with a K&N 63 Series intake.
  • Expect real-world gains between a few horsepower and low double digits, with no additional tuning.
  • The K&N 50-1542 NextGen is listed as requiring no tune.
  • Oiled cotton filters are washable and reusable but need cleaning and oiling; dry filters skip the oil.
  • Use only the oil the filter manufacturer specifies, apply it lightly, and never touch the MAF sensor element with your fingers.

Table of Contents

Why a Cold Air Intake Is Worth Considering on the 5.7 HEMI

If you own a Charger or Challenger with the 5.7L HEMI, you already know the sound is half the appeal. A cold air intake is one of the most popular first upgrades for that engine because it changes how air gets to the motor. The stock airbox pulls in warm air from the engine bay. A cold air intake relocates the filter and draws in cooler air from outside the hot zone, which is the basic idea behind every intake on the market.

At Merrick Motorsports, we carry several intakes for the 5.7 HEMI, and each one takes a slightly different approach. We'll walk through the options below so you can match the right one to your build, your budget, and how much garage time you're willing to put in.

SAE International guidance on intake air temperature and engine volumetric efficiency

5.7 HEMI Cold Air Intake Horsepower Gains: What the Numbers Say

Let's talk numbers, because that's where most of the arguments start. K&N's engineering data for the 50-1542 NextGen intake on the 5.7L V8 estimates a gain of 23.5 horsepower at 4905 RPM and 18.39 lb-ft of torque at 1999 RPM. Those are manufacturer estimates, not a guarantee for every car on every dyno.

K&N 11-23 Dodge Charger (5.7L/6.1L V8) NextGen Cold Air Intake (50-1542)
K&N 11-23 Dodge Charger (5.7L/6.1L V8) NextGen Cold Air Intake (50-1542)

Independent dyno testing tells a more modest story. Fast Hemis reported dyno-verified gains of +11.8 horsepower and +14.5 lb-ft on the 5.7L HEMI with a K&N 63 Series intake. Enthusiast consensus on forums points to typical real-world gains around 5 horsepower when no additional tuning is done. Our honest read: expect something between a few horsepower and low double digits, and let the sound and throttle feel be the bonus.

Independent dyno comparison of cold air intakes on HEMI engines

Throttle Response, Sound and Airflow: What You Actually Feel

Dyno sheets are great for bragging rights, but the butt dyno is what you live with every day. Here's what changes when you bolt on a cold air intake for your 5.7 HEMI.

Throttle response. A cold air intake swaps the stock airbox for a tube and filter designed to move air more freely, so the engine has less restriction to fight on tip-in.

Mid-range pull. A cold air intake with a sealed housing or heat shield is designed to keep intake air cooler, which is the basic idea behind these parts.

The sound. This is the upgrade your neighbors will notice before you do. A new intake changes the engine's intake note, and the 5.7 HEMI has a strong V8 voice. If you want a sensory preview, search for owner clips of the specific intake you're considering, sound is subjective, and what sounds "just right" to one guy might sound like a leaf blower to his wife.

Real-world MPG. Fuel economy results depend mostly on how you drive. A cold air intake is not a fuel-economy product, so buy it for the sound and the feel rather than to save gas.

The tuning caveat. A tune can change how the engine uses the extra airflow, and the K&N 50-1542 listing states it requires no tune. We cover the tune question in detail below.

High-performance aftermarket air intake system installed inside a 5.7L V8 engine bay
High-performance aftermarket air intake system installed inside a 5.7L V8 engine bay

SAE International guidance on intake air temperature and engine volumetric efficiency

Oiled vs Dry Air Filter for HEMI: Which Fits Your Build

Filter choice comes down to maintenance tolerance and where you drive. Oiled cotton filters are washable and reusable, but they require cleaning and oiling.

Dry filters skip the oil. Several of our intakes use a dry S-style element. Pick based on how much maintenance you're willing to do.

Merrick Motorsports Cold Air Intake Options Compared

Here's a quick side-by-side of the intakes we stock for the 5.7 HEMI. Prices are current listing prices.

Intake Filter Type Starting Price Best For
K&N 50-1542 NextGen Oiled cotton, washable $479.86 Proven dyno numbers, no tune required
K&N 63-1114 AirCharger Oiled cotton, washable $345.03 Budget-friendly K&N option
aFe Momentum GT Pro 5R Stage-2 (54-72202) Oiled $478.44 Sealed housing, premium hardware
aFe MagnumFORCE Pro DRY S (51-12162) Dry, washable $478.44 Heat-shielded, low-maintenance filter

Starting Price

K&N 11-13 Dodge Charger/Challenger / 11-13 Chrysler 300C V8-5.7L AirCharger Performance Intake (63-1114)
K&N 11-13 Dodge Charger/Challenger / 11-13 Chrysler 300C V8-5.7L AirCharger Performance Intake (63-1114)
K&N 50-1542 NextGen $479.86
K&N 63-1114 AirCharger $345.03
aFe Momentum GT Pro 5R Stage-2 (54-72202) $478.44
aFe MagnumFORCE Pro DRY S (51-12162) $478.44

Let's go through each one.

K&N 50-1542 NextGen Cold Air Intake

This is the intake listed with the most documented figures in our catalog. The high-density polyethylene tube increases airflow volume, and the custom NextGen airbox helps protect intake air from engine bay heat. It pairs with a washable, reusable High-Flow LIFETIME filter with oiled cotton media, and K&N rates it for up to 100,000 miles between filter services under normal highway driving. Installation typically runs under 60 minutes. Skip it if you want a dry filter.

Best for: owners who want the most documented gains with no tune required. Skip if: you want to avoid oiling your filter.

K&N 63-1114 AirCharger Performance Intake

This is a lower-priced K&N option. It uses a reusable oiled cotton filter and a custom heat shield to help protect intake air from engine bay heat. Installation is typically under 90 minutes. Some intakes in this family are not legal for sale or use on pollution-controlled vehicles in California, so check the CARB status for your specific vehicle before you buy.

Best for: budget-minded owers who want a reusable K&N filter. Skip if: you live in California and need a CARB-compliant part for your car.

aFe Momentum GT Pro 5R Stage-2 (54-72202) and Dry S Stage-2 (51-72202)

aFe's Momentum GT line is built around a one-piece sealed housing with a tire-tread top, a large filter, and premium hardware. The Dry S version (51-72202) uses a dry element.

Best for: owners who want a sealed, premium-feeling intake. Skip if: budget is the main concern.

aFe MagnumFORCE Intake Stage-2 Pro DRY S (51-12162)

The MagnumFORCE uses a one-piece 16-gauge powder-coated heat shield that requires no cutting or drilling. The molded plastic tube is designed to maximize airflow volume, and it uses a dry, washable, limited-lifetime filter.

Best for: owners who want a dry filter and a heat shield that installs without modification. Skip if: you prefer an oiled filter.

Pricing Breakdown: What Each Intake Costs

All prices below are from our current catalog:

  • K&N 50-1542 NextGen: $479.86
  • K&N 63-1114 AirCharger: $345.03
  • aFe 54-72202 Momentum GT Pro 5R: $478.44
  • aFe 51-72202 Momentum GT Pro Dry S: $489.44
  • aFe 51-12162 MagnumFORCE Pro DRY S: $478.44

If you're weighing price, the K&N 63-1114 is the lowest entry point in this list. Think of the price difference as a matter of build and features, not a guaranteed horsepower bump.

aFe Momentum GT Pro 5R Stage-2 Intake System 11-15 Dodge Challenger / Charger R/T V8 5.7L HEMI (54-72202)
aFe Momentum GT Pro 5R Stage-2 Intake System 11-15 Dodge Challenger / Charger R/T V8 5.7L HEMI (54-72202)

Does a Cold Air Intake Need a Tune and Affect Your Warranty

Short answer: the K&N 50-1542 is listed as requiring no tune. Whether a tune is needed for other intakes depends on the product.

Do you need a tune? The K&N 50-1542 listing states it requires no tune. A custom tune can recalibrate fueling and timing to use extra airflow, if you want to pursue that.

Long-term engine health. Follow the filter maker's oiling and cleaning instructions. Use only the oil the filter manufacturer specifies and apply it lightly.

Warranty concerns. Aftermarket parts can raise questions with your dealer, so keep your receipts and installation notes, and talk to your dealer's service advisor if you're worried. If you're in California, check the CARB status of the intake for your specific vehicle before you buy.

The MAF sensor watch-out. Use only the oil the filter manufacturer specifies, apply it lightly, and never touch the sensor element with your fingers.

Magnuson-Moss Warranty Act guidance on aftermarket parts

Cold Air Intake Installation Tips for a Weekend Garage Build

Most of these intakes are a reasonable weekend project for a home mechanic with basic tools. A few things to keep in mind:

  • Read the instructions before you touch a wrench. Lay out every bolt and clip.
  • Don't touch the MAF sensor element with your fingers unless the manual says so.
  • Clean your filter and oil it (if oiled) before the first drive, following the filter maker's instructions.

Watch out: an over-oiled filter is the most common way to foul the MAF sensor, so use only the oil the filter maker specifies and wipe off any excess.

Guidance on mass airflow sensor care for modified intakes

Pick Your Intake and Get It on the Car

If you want the most documented figures and don't mind oiling a filter, the K&N 50-1542 NextGen is a strong choice. If you want a dry filter and a heat shield that requires no drilling, the aFe MagnumFORCE Pro DRY S fits that need. Budget shoppers should look at the K&N 63-1114 AirCharger, and those wanting a sealed housing should check out the aFe Momentum GT line.

Whatever you pick, match it to your exact year, make, model, and engine, and check the CARB status if you're in California. Get your intake on your Charger or Challenger and enjoy the sound.

Last Updated: November 19, 2026

Frequently Asked Questions

How much horsepower does a cold air intake add to a 5.7 HEMI?

Manufacturer-tested figures for the K&N 50-1542 NextGen intake list an estimated gain of 23.5 horsepower at 4,905 RPM and 18.39 lb-ft of torque at 1,999 RPM. Dyno results from Fast Hemis on a K&N 63 Series intake showed gains of about 11.8 horsepower and 14.5 lb-ft. Enthusiast reports on real-world gains without a tune often land near 5 horsepower. Your results depend on the intake, your exhaust and how the engine is tuned.

Do I need a tune after installing a cold air intake on my Charger?

Community discussions suggest that stock sensors may not fully adjust timing and fuel maps for the extra airflow, so some owners see bigger benefits after a tune. The K&N 50-1542 NextGen listing states it delivers its gains with no tune required, so check the specific product listing before you buy. Many owners run the intake stock first and decide on tuning after feeling the difference.

Is an oiled or dry air filter better for a HEMI cold air intake?

Oiled cotton media filters, like those on the K&N and aFe Momentum GT options here, are washable and reusable, and K&N rates its filter for up to 100,000 miles of normal highway driving between services. Dry filters are typically easier to maintain without oil. Choose based on how you plan to clean and service the filter and whether your intake is a dry-media design.

How long does it take to install a cold air intake on a 5.7 HEMI?

K&N lists the NextGen 50-1542 as typically installable in less than 60 minutes, and the AirCharger 63-1114 in less than 90 minutes. Plan for a longer first install if you have never removed the factory airbox. Keep a basic socket set, a few extensions and a good light handy, and take your time around the hoses and sensors.


Leave a comment

Please note, comments must be approved before they are published