SEMA 2026: FAST Wins Big, Plus LS Intake Upgrades for Your Build

FAST, Intake Manifolds, LS Performance, Performance Parts, SEMA 2026, Throttle Bodies -

SEMA 2026: FAST Wins Big, Plus LS Intake Upgrades for Your Build

SEMA 2026 delivered a fresh headline for LS enthusiasts: the FAST LS XCR LS3 Intake Manifold 112 MM won the Performance–Racing Product category in the SEMA New Product Awards announced November 3, 2026. The show ran November 3–6 in Las Vegas, putting new aftermarket engineering in front of builders, buyers and enthusiasts.

For Merrick Motorsports customers, that is a good starting point for exploring the FAST intake lineup. Below, we separate the award news from four existing products in our catalog so you can plan your next LS project without confusing different manifold families.

Visitors entering the SEMA New Products Showcase beneath a large display banner
New Products Showcase image supplied with SEMA's November 3, 2026 awards press release. Photo courtesy of SEMA. This is a general show image, not a photograph of the FAST award-winning manifold.

The SEMA News: FAST's 112mm LS XCR LS3 Manifold Wins

SEMA's official release names the FAST LS XCR LS3 112mm intake as the category winner. More than 1,300 products competed across 15 award categories, with a winner and two runners-up selected in each category.

The award belongs to that specifically named product. The LSXR, LSXRT, rectangular-port manifold and throttle body featured below are existing FAST listings at Merrick Motorsports, not representations of the new 112mm winner. Availability of the award-winning XCR manifold through our store has not been confirmed.

Four FAST Products to Explore for Your LS Build

1. FAST LSXR 102mm Gen III LS Manifold, Black

The LSXR listing describes a polymer manifold with a black finish. This is an option to investigate when planning an LS intake upgrade, but its name and opening size alone do not establish fitment for a modified or swapped engine. Confirm the exact cylinder-head ports, fuel-system arrangement and installation requirements before ordering.

FAST black LSXR intake manifold with a large front opening and orange sealing ring
Existing FAST LSXR 102mm catalog product, not the SEMA-winning XCR 112mm manifold.

View the FAST LSXR 102mm manifold.

2. FAST LSXRT 102mm Manifold, Black

The LSXRT product description identifies GM 4.8, 5.3 and 6.0 truck-engine applications and standard-design runners intended for mild street use. For a truck or swap project, confirm the engine configuration and available clearance rather than choosing by displacement alone.

FAST black LSXRT manifold displayed with orange seals and installation hardware
LSXRT product photo from our catalog. Refer to the listing for current package contents.

View the FAST LSXRT 102mm manifold.

3. FAST LSX 103mm Rectangular-Port Manifold, Black

This listing describes a tunnel-ram-style polymer intake with removable stacks and a reversible top. The catalog description discusses LS3 rectangular-port and LS7 raised rectangular-port versions; confirm the exact version represented by the selected part before ordering. Do not assume one manifold fits both head types. Its listed 103mm opening also distinguishes it from the 112mm SEMA award winner.

FAST black tunnel-ram-style intake manifold with a red rail visible along one side
Rectangular-port manifold listing photo. Confirm the selected part and included accessories on the product page.

Explore the FAST 103mm rectangular-port listing.

4. FAST 102mm Electronic LS Throttle Body

The 102mm throttle body listing describes an electronic drive-by-wire unit for compatible GM LS control systems. It names several Gen IV LS ECU applications, but a complete installation still depends on the actual ECU, wiring and intake combination. Treat it as a component to match to your build, not an automatically compatible add-on to every manifold above.

FAST black electronic throttle body with its throttle blade, orange seal and four bolts
FAST 102mm electronic LS throttle body from the Merrick Motorsports catalog.

View the FAST 102mm throttle body.

Build Around the Engine You Actually Have

Award news makes a great inspiration board. A successful parts order starts with the actual engine and intended use. Have your engine code, cylinder-head information, throttle-control system, fuel-system details and clearance measurements ready. For a swap, describe the installed engine rather than relying solely on the vehicle's original year and model.

These four products are shopping examples, not a pre-validated package. Check individual listings for current availability, fitment and installation requirements, and ask Merrick Motorsports for help narrowing the options before buying. We are not promising a particular horsepower gain or claiming that these existing listings were introduced at SEMA 2026.

Attendees examining display tables inside the SEMA New Products Showcase
Inside the New Products Showcase, from SEMA's 2026 awards press materials. Photo courtesy of SEMA. General event coverage, not a FAST booth or product demonstration.

Source and Photo Credits

News source: SEMA's official November 3, 2026 New Product Award announcement. Show photographs courtesy of SEMA, supplied with that release for editorial coverage; see the SEMA media toolkit. Product photographs and product details are from the linked Merrick Motorsports catalog listings.


Leave a comment

Please note, comments must be approved before they are published