Ridetech at SEMA 2026: 4-Link Recognition and 12 Suspension Picks
A suspension build is a system, not a shopping cart full of shiny parts. Ridetech’s SEMA recognition is a good excuse to talk about the pieces that make that system work, from spindles and control arms to springs, shocks and rear suspension layout.
The SEMA 2026 news
SEMA named the Ridetech Bolt-On 4-Link an Engineered New Product runner-up at the 2026 show. The official award list does not identify a vehicle application or part number for that entry, so we are not labeling a particular catalog kit as the exact award-recognized product.
Read the official SEMA 2026 New Product Award results.
A closer look at Ridetech’s new F-150 4-link
Separately, Ridetech’s new-product announcement introduces its 4-link system for 2015–2026 Ford F-150 2WD and 4WD applications. These official photos show the no-notch parts layout and an assembled configuration with coilovers. They illustrate the new F-150 system, not the older Chevrolet kit featured later in our catalog selections. The SEMA award listing alone does not confirm the pictured configuration as the precise award entry.

New F-150 no-notch 4-link kit components. Photo: Ridetech.

Assembled F-150 system shown with coilovers. The base 4-link kit listing states that shocks are not included; package contents depend on the selected bundle. Photo: Ridetech.
Ridetech excludes Lightning, Raptor and Tremor models from this F-150 application. Its product page also cautions against the C-notch configuration on PowerBoost trucks because of clearance issues. Confirm the complete application and configuration before ordering.
Read Ridetech’s new F-150 4-link announcement. Check the manufacturer’s configuration and fitment details.
12 Ridetech products in our catalog
The following are separate catalog selections, not a list of SEMA debuts or a promise that they fit together. Check each listing for the exact application, package contents and availability.
1. GM F-, X- and A-Body Tall Spindles
Listed for 1967–1969 GM F-body, 1968–1974 X-body and 1964–1972 A-body applications, these spindles provide a specified 2-inch drop. The pair includes nuts and cotter pins. Confirm the vehicle and brake setup before choosing them.
Explore the tall spindle pair.

2. AFX Hub 2-Inch Drop Spindles
The AFX spindle brings Corvette-style hub and brake options to specified GM platforms. The listing identifies C5/C6 brake compatibility and separately sold caliper brackets. Plan the spindle, hub and brakes as a package.

3. C5/C6 Caliper Brackets for AFX Hub Spindles
These brackets are listed for C5/C6 calipers on Ridetech AFX hub spindles. A pair and hardware are included. They are supporting conversion components, not universal caliper brackets.

4. 1955–1957 Chevy Front HQ ShockWaves
This front pair is listed for stock lower arms and includes rebound-adjustable ShockWaves, quarter-inch airline fittings and a T-bar. Confirm the remaining air-suspension components separately.
Explore the front HQ ShockWaves.

5. 1955–1957 Chevy Front Lower StrongArms
These lower arms are intended for CoilOver or ShockWave use. The listing includes tubular arms, ball joints, cross shafts and Delrin bushings, with a satin-black powder-coated finish.

6. 1955–1957 Chevy Front HQ CoilOvers
This front pair is specifically listed for Ridetech lower arms. Rebound-adjustable shocks, springs, spring mounts and Delrin spring washers are included. Do not assume stock-arm compatibility.
Explore the front HQ CoilOvers.

7. 1955–1957 Chevy Upper StrongArms
These upper control arms include tall ball joints, cross shafts and Delrin bushings. Coordinate them with the intended spindles and lower arms rather than assuming every aftermarket combination works together.

8. 1955–1957 Chevy Rear HQ CoilOvers for Ridetech 4-Link
The rear pair is listed for a Ridetech 4-link system. Rebound-adjustable shocks, springs and mounting components are included. This is not a complete rear suspension conversion by itself.
Explore the rear HQ CoilOvers.

9. 1955–1957 Chevy Front MuscleBar for StrongArms
This version requires Ridetech lower arms. The sway bar, end links, bushings, brackets and hardware are listed as included. The control-arm requirement distinguishes it from the next product.
Explore the StrongArms-compatible MuscleBar.

10. 1955–1957 Chevy Front MuscleBar for Stock Arms
This separate listing is for vehicles retaining stock lower arms. Choose by the actual control arms installed on the car, not simply its model year.
Explore the stock-arm MuscleBar.

11. 1955–1957 Chevy Wagon Composite Leaf Springs and HQ Shocks
This wagon kit is listed with a 2-inch drop. The description includes leaf springs, Delrin bushings, shackles, U-bolts, shocks and hardware. Check wagon-specific fitment before comparing it with a sedan setup.
Explore the wagon leaf-spring and shock kit.

12. 1955–1957 Chevy Two-Piece-Frame Double-Adjustable 4-Link
This kit requires the specified two-piece frame. It includes R-Joints, bars, a diagonal link, a bolt-on crossmember and weld-on axle brackets. ShockWaves or CoilOvers are sold separately. “Bolt-on” does not mean this installation has no welding.
Explore the double-adjustable 4-link.

Build the combination before buying the parts
Send Merrick Motorsports your exact vehicle year, model, frame configuration, current modifications and intended use. A SEMA award starts the conversation; the correct combination of parts makes the build work.
SEMA news checked November 7, 2026. Announcement-based coverage, not firsthand show reporting. F-150 news images: Ridetech. Catalog photos illustrate the separate product selections, not necessarily the award-recognized product.