Fresh in the Garage: 12 Picks from Carli, Bilstein & Mishimoto
Some builds start with a horsepower goal. Others start with a pothole that rearranges your coffee, a tired suspension, or a radiator that has officially had enough.
We’re growing the lineup at Merrick Motorsports, and three newer names worth exploring are Carli, Bilstein and Mishimoto. Here are 12 recent product additions, with something for heavy-duty trucks, midsize pickups, classic Jeeps and corner-carving sports cars.
This is inspiration for different builds, not a shopping list for one vehicle. Follow each product link for current details and availability, and confirm your exact application before ordering.
Carli: The Details Behind the Truck Build
A suspension project is more than a lift number. Springs, links and application-specific hardware all deserve a place in the plan. These four Carli additions show why the details matter.
1. Super Duty Platinum E-Venture Touch Screen A-Pillar Mount
Even the interior trim can change what your installation needs. This mount addresses the mounting provision for certain 2025–2026 Ford F-250 and F-350 Platinum trucks equipped with a suede A-pillar. It’s a supporting part for an E-Venture setup, not the touchscreen or complete suspension system.

Check the Carli Platinum E-Venture A-pillar mount.
2. Ford F-250/F-350 Extended End Links
For a Super Duty suspension project, don’t stop planning at springs and shocks. These Carli extended end links are listed for 2017-and-newer F-250/F-350 applications. Confirm their compatibility with your specific suspension system and lift configuration rather than assuming “extended” makes them right for every lifted truck.

Explore the Carli Super Duty extended end links.
3. Ram 2500 HEMI Front Coil Springs
Gas and diesel trucks don’t put the same weight over the front axle. These linear-rate Carli front coils are designed around the reduced weight of HEMI-powered Ram trucks, with the listing identifying 2013–2023 Ram 2500 applications and a 3–3.5-inch lift category. These are front springs, not a complete lift system. Match the rest of the setup accordingly.

Shop the Carli Ram 2500 HEMI front coils.
4. Ford F-250 4x4 Passenger-Side Fabricated Radius Arm
Working through a component-specific Super Duty build? This listing is for a passenger-side fabricated radius arm for 2005–2022 Ford F-250 Super Duty 4x4 applications. Pay attention to the side: this is not described as a pair. Confirm the required matching components and suspension compatibility before ordering.

Brand logo shown; the listing does not currently show the radius arm itself in its featured image.
View the Carli passenger-side fabricated radius arm.
Bilstein: Suspension Options Beyond One Kind of Build
A stock-height Ram, a midsize trail truck and a German sports car need different things from their suspension. These four Bilstein additions are a good reminder to choose by application, not just by brand name.
5. Ram 1500 B6 4600 Front Shock
Not every truck needs more height. Bilstein’s B6 4600 line is designed as an upgrade to original-equipment shocks on stock-height light trucks and SUVs. This front-shock listing is titled for the 2019–2022 Ram 1500 and uses a monotube design with application-specific tuning. Start here if maintaining stock ride height is part of your plan, and check the detailed fitment for your trim.

Explore the Bilstein Ram 1500 B6 4600 front shock.
6. Colorado Trail Boss/GMC Canyon B8 6112 Kit
This B8 6112 kit pairs two 60mm shock absorbers with matched coil springs and billet aluminum spring seats. The listing identifies 2023–2026 Colorado Trail Boss models and select Canyon AT4, Denali and Elevation applications. Its title lists a 0.75–2.5-inch lift range; the appropriate setting depends on the application. Don’t assume every Colorado or Canyon uses the same kit.

Check the Colorado and Canyon B8 6112 kit.
7. BMW Z4 M B6 Front-Right Strut
The garage doesn’t have to contain a truck to benefit from a suspension refresh. This Bilstein B6 front-right 36mm monotube strut is listed for 2006–2008 BMW Z4 M Coupe and M Roadster applications. The B6 description specifies pairing with the factory spring. It’s a side-specific strut, so plan the full job rather than mistaking one listing for a complete set.

View the BMW Z4 M B6 front-right strut.
8. Audi A4 Allroad B6 DampTronic Rear Shock
Electronic suspension deserves an application-specific approach. This B6 DampTronic rear monotube shock is listed for select 2017–2021 Audi A4 allroad applications. Its description specifies compatibility with factory electronic damping controls and OE springs. Confirm your car’s exact equipment before ordering; a conventional damper and an electronically controlled one are not interchangeable shopping choices.

Explore the Audi B6 DampTronic rear shock.
Mishimoto: Cooling Parts with Different Jobs to Do
Replacement cooling, custom-project radiators and supplemental oil cooling are different categories. These four Mishimoto additions give you options without pretending one part solves every temperature problem.
9. Jeep Cherokee Replacement Radiator
This radiator is listed for select 1991–2001 Jeep Cherokee applications and uses plastic end tanks attached to an aluminum core. It’s described as a direct OEM replacement intended for stock cooling efficiency, not an all-aluminum performance radiator. For an aging Cherokee, putting the cooling system back in order can be a worthwhile project all by itself.

Check the Mishimoto Cherokee replacement radiator.
10. Ford 6.7L Powerstroke Aluminum Degas Tank
For select 2011–2019 Ford F-250 and F-350 6.7L Powerstroke applications, this natural-finish aluminum primary degas tank offers an alternative to the factory plastic component. The listing describes fully welded construction and an integrated sight glass for checking coolant level. It’s a supporting cooling-system component, not a radiator replacement or a diagnosis for every coolant leak.

View the Powerstroke aluminum degas tank.
11. Universal 25 × 16 × 3-Inch Aluminum Radiator
Custom project on the stands? This Mishimoto universal aluminum radiator is listed at 25 × 16 × 3 inches, with a dual-core design and polished end tanks. The key word is universal, not direct-fit. Measure the available space and confirm mounting, hose routing, inlet and outlet locations, and fan clearance before deciding it belongs in your build.

Explore the Mishimoto universal aluminum radiator.
12. Subaru BRZ/Toyota GR86 Thermostatic Oil Cooler Kit
This silver thermostatic kit is listed for select 2022-and-newer Subaru BRZ and Toyota GR86 applications. The description identifies a 19-row external oil cooler, a direct-fit mounting bracket and -10AN lines. It also states that the thermostatic configuration eliminates the factory liquid-to-liquid cooler. Make sure you’re selecting this configuration intentionally rather than treating it as identical to the non-thermostatic version.

Check the BRZ and GR86 thermostatic oil cooler kit.
Build the Plan Before You Fill the Cart
These 12 additions show the range that Carli, Bilstein and Mishimoto bring to our lineup. There are parts for a stock-height refresh, supporting pieces for a larger suspension project, replacement cooling components and hardware for a more specialized build.
Start with your vehicle’s year, model, trim, engine and existing modifications. Confirm whether you’re buying a single component, a pair or a kit, and read the installation requirements before committing. A parts list with a purpose beats a shopping cart with ambition.
Follow the links above to explore the products at Merrick Motorsports. If you’re unsure which direction fits your build, contact us before ordering and let’s work through the details.