APR Performance Challenger Aero: Match the Splitter to the Front End
Carbon fiber gets the attention, but fitment deserves the first conversation. From a front splitter to a coordinated aero kit, APR Performance gives Challenger owners several ways to build a sharper-looking car. Here are nine options available through Merrick Motorsports, with installed-on-car photos to help you picture the finished setup.
Start with your model year, trim, bumper and body configuration. A standard-body Hellcat, a Widebody and an early RT/SXT should not be treated as interchangeable applications.
2018–2023 Demon / Hellcat Widebody Front Wind Splitter
For a Widebody build, start with the application made for it. This listing specifies 2018–2023 Demon/Hellcat Widebody fitment, carbon-fiber reinforcement, a full undertray and included stainless-steel support rods. It is listed as made to order, so confirm current lead time before planning your installation.
Shop the Demon / Hellcat Widebody splitter
2008–2010 RT/SXT Front Wind Splitter
Early Challenger owners have their own application. The RT/SXT splitter listing describes carbon-fiber reinforcement, a full undertray and included stainless-steel support rods. Confirm your bumper configuration before ordering rather than choosing a later-car part that looks similar.
Shop the 2008–2010 RT/SXT front wind splitter
2015–2023 Scat Pack/SRT Front Wind Splitter
This listing gives 2015–2023 Scat Pack/SRT owners a separate option to investigate, with carbon-fiber reinforcement and support rods described in the product listing. Match the part to your actual front end before checkout.
Shop the Scat Pack/SRT splitter
2015–2023 Hellcat Front Airdam / Lip
The Hellcat front airdam/lip takes another approach to the nose of the car. Its listing specifies Hellcat or Hellcat Redeye compatibility and requires a choice between widebody and standard body. It describes pre-preg carbon-fiber construction and underside metal skid plates. Make that body-style selection carefully.
Shop the Hellcat front airdam / lip
2015–2023 Hellcat Side Rocker Extensions
Side rocker extensions help tie the front and rear styling together. APR lists pre-preg carbon-fiber construction and included mounting hardware. Important fitment note: the listing says Widebody applications require slight modification. Confirm the details before ordering for a Widebody car.
Shop the Hellcat side rocker extensions
2015–2023 Hellcat Front Bumper Canards
Want more detail around the front bumper? These APR canards add another carbon-fiber element to the Hellcat front end. The listing describes pre-preg construction, UV-resistant coating and included screws, nuts and bolts. Check the application and mounting requirements for your bumper.
Shop the Hellcat front bumper canards
2015–2023 Hellcat Rear Deck Spoiler
The rear deck spoiler gives the tail of the car its own carbon-fiber focal point. APR lists vehicle-specific shaping, pre-preg carbon-fiber construction, UV-resistant clear coat and included mounting hardware. It is available separately if you are building the car in stages.
Shop the Hellcat rear deck spoiler
2015–2023 Hellcat Rear Diffuser
For the lower rear of the car, the APR diffuser brings carbon-fiber construction and a UV-resistant coating. The listing explicitly says it does not fit the SXT model. Confirm rear-bumper compatibility before adding it to your build.
Shop the Hellcat rear diffuser
2015–2023 Hellcat Aero Kit: A Coordinated Starting Point
If you want to plan the front, sides and rear together, the APR Hellcat aero kit packages a three-piece front air dam, side rocker extensions and rear deck spoiler. The listing describes pre-preg carbon-fiber construction. The rear diffuser and front bumper canards are not included in that listed package, so consider those separately and confirm the kit's fitment for your body configuration.
Shop the Hellcat carbon-fiber aero kit
Build Around Your Challenger, Not Just a Photo
Use these installed photos for inspiration, then use the product applications to choose your parts. Check model year, trim, standard-body versus Widebody fitment, mounting requirements and current lead times. APR describes these parts as aerodynamic components, but results depend on the complete vehicle setup; no specific downforce or lap-time gain is promised here.
Start with the area you want to change, or plan the whole carbon-fiber package. Every product above links directly to its Merrick Motorsports listing so you can check the details before ordering.