9 Best Grille Guards
A good front-end upgrade should suit the vehicle, work with its bumper, and look like it belongs there. Whether you want an angular RAM bull bar, a low-profile Bronco hoop, or a brush guard for a HUMMER EV, start with fitment and the features you will actually use.
These are nine grille-guard and bull-bar options from the Merrick Motorsports catalog, selected for different vehicles and build priorities. This is an editorial shortlist, not a crash-tested ranking. Most products below are bull bars rather than full-width grille guards, so compare the actual coverage rather than assuming every option protects the same areas.
Grille guard or bull bar: know what you are shopping for
A compact center hoop and a wider brush guard are different designs. Look at how much of the vehicle’s front each product covers, where it mounts, and whether its purpose is primarily styling, light mounting, or the specific protection described by its manufacturer. A bar’s appearance does not establish impact performance or make it a rated recovery point.
1. aFe POWER Terra Guard for RAM 1500 DT

Our pick for: RAM owners comparing a feature-rich bar with a listed winch-mount option.
This package combines 1/4-inch and 3/8-inch steel plate with 2-inch steel tubing. Its description lists recovery-shackle mounts, light tabs for multiple 4-, 6-, or 9-inch lights, and an integrated plate accommodating winches rated up to 10,000 pounds. The fine-textured black powder coat gives it a straightforward, purposeful finish.
The listing names 2019–2026 RAM 1500 DT applications. Confirm your exact trim, bumper, sensor clearance, winch fitment, and manufacturer requirements before ordering. Lights are not included.
Shop the aFe RAM 1500 DT Terra Guard.
2. N-Fab HVM for RAM 1500

Our pick for: an angular RAM front-end treatment with an integrated light-bar location.
The HVM uses steel uprights, a boxed upper section, and an aluminum skid plate. Its description identifies frame mounting, integrated recovery-hook features, and a recessed mount for a separately sold 20-inch LED light bar. The design is intended to sit close to the original bumper rather than look like a distant bolt-on afterthought.
The title says 2019–2023, while the fitment table includes selected later applications. Confirm the exact model year and trim instead of relying on either range alone. Do not assume it includes a winch plate.
Shop the N-Fab HVM RAM bull bar.
3. aFe Terra Guard for RAM 1500 RHO

Our pick for: RHO owners starting with a listing specifically named for their trim.
This Terra Guard uses 1/4-inch and 3/8-inch steel plate and 2-inch tubing. Its description lists mounts accepting standard 3/4-inch D-ring shackles and tabs for 4-, 6-, or 9-inch lights, with a fine-textured black powder coat.
The product title identifies the 2025–2026 RHO. Its broader fitment table should not be taken as permission to install it on any RAM. Confirm the correct application and included hardware. This description does not establish the same winch-mount specification as the DT package above.
4. aFe Terra Guard for Toyota Land Cruiser J250

Our pick for: J250 owners planning a bar with several lighting-mount possibilities.
The Land Cruiser version lists 3/16-inch and 1/4-inch steel plate with 2-inch tubing, recovery-shackle mounts, and light tabs accommodating up to four 6-inch lights or a 20-inch light bar. The description identifies a no-drill, direct bolt-on installation. Shackles and lights are not included.
The title names 2024–2025 models, while the table lists selected 2026 applications too. Have the exact year and trim confirmed before purchase.
Shop the Land Cruiser J250 Terra Guard.
5. DV8 Offroad Capable Bull Bar for Ford Bronco

Our pick for: Broncos equipped with the OEM Capable front bumper.
DV8 describes this steel bar as offering light protection against shrubs, branches, and other light debris. Adjustable, removable tabs accommodate a 13–20-inch single- or dual-row light bar above or below the hoop, or 3-inch pods above it.
The critical detail is the bumper: this is the Capable-bumper option, not a universal Bronco bar. Confirm your model year and factory bumper before choosing. Lighting shown in the photo does not establish what is included.
Shop the DV8 Bronco Capable Bull Bar.
6. DV8 Offroad Factory Modular Bumper Bull Bar for Ford Bronco

Our pick for: a low-profile bar on a compatible OEM modular steel bumper.
This DV8 design mounts at factory accessory locations using OEM hardware. Its description emphasizes a lower position in front of the grille and space for a 13-inch single-row LED light bar within the bar.
Choose it for the correct modular steel bumper, not simply because your vehicle is a Bronco. The title and fitment table show different year ranges, so verify the exact application.
Shop the DV8 Bronco modular-bumper bar.
7. TURN Offroad Baja Bull Bar for Ford Bronco

Our pick for: Bronco owners who prefer a taller Baja-style hoop.
This listing identifies a 2021-and-newer Bronco application with the OEM modular bumper. Its product photo shows a raised tubular hoop with supporting braces, giving it a different profile from the low-mounted DV8 option.
The catalog description is brief. Confirm materials, hardware, sensor clearance, supported model years, and installation requirements before ordering; do not infer a load rating or winch compatibility from the shape.
Shop the TURN Offroad Bronco Baja Bull Bar.
8. GMC HUMMER EV Brush Guard with Black Kevlar Finish

Our pick for: HUMMER EV owners seeking a wider brush-guard appearance.
The listing describes handcrafted aluminum construction with a textured black Kevlar finish and identifies pickup and SUV applications for 2021–2026. The pictured design extends farther across the front than several compact center hoops in this roundup.
The description states compatibility with adaptive cruise control and says the front parking sensors are not relocated. Confirm those claims for your exact vehicle and equipment before installation rather than assuming compatibility with every driver-assistance function.
Shop the HUMMER EV brush guard.
9. aFe Terra Guard for Subaru Outback Wilderness

Our pick for: a 2026–2027 Outback Wilderness build that needs a vehicle-specific bar.
This listing identifies the turbocharged 2.4-liter Wilderness application. Its description lists 3/16-inch and 1/4-inch steel plate, 2-inch tubing, integrated mounts for 3/4-inch shackles, and tabs accommodating 4–9-inch light pods or a 20-inch light bar.
Lights and shackles are not included. Confirm the exact year, trim, bumper clearance, and installation instructions. Do not substitute a different-generation Outback bar based on a similar-looking product photo.
Shop the Outback Wilderness Terra Guard.
How to choose the right grille guard
- Start with the exact vehicle: model year, trim, body generation, and bumper type all matter.
- Compare coverage: a compact bull bar and a wider brush guard do not cover the same areas.
- Check electronics: obtain manufacturer confirmation for parking sensors, cameras, radar, and other front-mounted equipment.
- Plan accessories: match light dimensions and mounts; confirm which parts are sold separately.
- Verify any recovery or winch provision: only use components for functions and loads explicitly approved by their manufacturer.
- Follow the exact installation instructions: mounting hardware and torque requirements are product-specific. Use a qualified installer when needed.
Frequently asked questions
Are these nine products interchangeable?
No. They are options for different vehicles and bumper configurations. Pick the correct application first, then compare styling and features within that application.
Does every bull bar include a winch mount?
No. The RAM DT Terra Guard description explicitly lists one; that does not establish winch compatibility for the other products here.
Will a bar work with my front sensors?
Do not assume it will. Confirm compatibility for your exact model, trim, bumper, and electronic equipment with the product manufacturer before installation.
Do lights in the product photos come with the bar?
Not necessarily. Several listings explicitly exclude lights. Review package contents before placing the order.
Choose the bar that belongs on your build
The best grille guard is the one that fits your vehicle and your plans, not simply the largest bar or the most aggressive photo. Compare the linked products, then contact Merrick Motorsports with your model year, trim, bumper type, and intended accessories so we can help narrow the options.
Product details reflect the linked catalog listings checked November 5, 2026. Confirm current availability, manufacturer fitment, package contents, and installation requirements before purchase. No collision-protection rating is claimed.