{"title":"Pontiac G8 Suspension \u0026 Lowering","description":"\u003cp\u003eShop suspension and lowering for the Pontiac G8. This collection includes shocks and struts, coilovers, lift and lowering springs, sway bars, control arms, bushings and steering parts, from brands like Pedders and BMR Suspension.\u003c\/p\u003e\u003cp\u003eParts are often specific to model year, trim and engine, so check the fitment details on each product page before you order.\u003c\/p\u003e\u003cp\u003eNeed help choosing the right part? Contact the Merrick Motorsports team for fitment help. Orders ship from our Las Vegas warehouse.\u003c\/p\u003e","products":[{"product_id":"bmr-08-09-pontiac-g8-front-hollow-29mm-adj-sway-bar-kit-w-bushings-red","title":"BMR 08-09 Pontiac G8 Front Hollow 29mm Adj. Sway Bar Kit w\/ Bushings - Red | SB012R","description":"BMR's suspension designed the SB012 sway bar for street performance, autocross, and road race applications. The large adjustable sway bars three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The SB012 front sway bar gives you a 87%-137% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB012 attaches to your G8 with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB012 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Hole 1 87% stiffer than OE bar. Hole 2 137% stiffer than OE bar.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":45442533621942,"sku":"BMRSB012R","price":275.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/fe7cb8e5f290bb3c3c74f2ebd2d7967bL.jpg?v=1789265689"},{"product_id":"pedders-06-09-pontiac-g8-extreme-xa-coilover-kit","title":"Pedders 06-09 Pontiac G8 Extreme Xa Coilover Kit","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586797306038,"sku":"PEDPED-160064","price":1415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/492f565894d112aa2594b20af41267a0.jpg?v=1791229965"},{"product_id":"pedders-front-spring-low-2006-2009-g8-each","title":"Pedders Front Spring Low 2006-2009 G8 EACH","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586798846134,"sku":"PEDPED-2954","price":138.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/c6957aa549476095f89a6983a76abf69L.jpg?v=1791229991"},{"product_id":"pedders-06-09-pontiac-g8-front-sportsryder-coil-spring-single-spring-fe2-height","title":"Pedders 06-09 Pontiac G8 Front SportsRyder Coil Spring (Single Spring \/ FE2 Height)","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586798911670,"sku":"PEDPED-2956","price":138.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/014077ccfd0e18f9fdacedac198b8203L.jpg?v=1791229992"},{"product_id":"pedders-06-09-pontiac-g8-low-fe2-height-rear-spring","title":"Pedders 06-09 Pontiac G8 Low FE2 Height Rear Spring","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586798977206,"sku":"PEDPED-2957","price":138.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/764695b1b455ead2ed5153335433dcf5L.jpg?v=1791229994"},{"product_id":"pedders-front-bump-stop-kit-2006-2009-g8","title":"Pedders Front Bump Stop\/Kit 2006-2009 G8","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586800550070,"sku":"PEDPED-4358","price":41.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/e0266e686e1ba4b4b663d010fa7af9beL.jpg?v=1791230020"},{"product_id":"pedders-06-09-pontiac-g8-front-strut-mount-bearing","title":"Pedders 06-09 Pontiac G8 Front Strut Mount Bearing","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586800812214,"sku":"PEDPED-5030","price":57.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/0c0a3836bf66be60fd6b66b48017b031L.jpg?v=1791230023"},{"product_id":"pedders-06-09-pontiac-g8-front-strut-mount","title":"Pedders 06-09 Pontiac G8 Front Strut Mount","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586801565878,"sku":"PEDPED-5851","price":80.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/3c98cd11c0d59125d97712c496835b7cL.jpg?v=1791230033"},{"product_id":"pedders-heavy-duty-rear-coil-spring-2007-2009-pontiac-g8-30mm-raise","title":"Pedders Heavy Duty Rear Coil Spring 2007-2009 Pontiac G8 (30mm Raise)","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586801991862,"sku":"PEDPED-7855","price":139.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/cfdb0f10d3a32a62412ab0568a9b4c9eL.jpg?v=1791230039"},{"product_id":"pedders-08-09-pontiac-g8-heavy-duty-rear-lift-springs","title":"Pedders 08-09 Pontiac G8 Heavy Duty Rear Lift Springs","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586802122934,"sku":"PEDPED-7955","price":139.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/cfdb0f10d3a32a62412ab0568a9b4c9eL_ad35c538-45d7-4aac-ab96-b9ef19b96226.jpg?v=1791230040"},{"product_id":"pedders-06-09-pontiac-g8-rear-sportsryder-shock","title":"Pedders 06-09 Pontiac G8 Rear SportsRyder Shock","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586803302582,"sku":"PEDPED-9295","price":165.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/58824ba1e69e8bf1aa3ad0e211b220b5L.jpg?v=1791230062"},{"product_id":"pedders-06-09-pontiac-g8-front-sportsryder-struts","title":"Pedders 06-09 Pontiac G8 Front SportsRyder Struts","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586803499190,"sku":"PEDPED-9464L","price":194.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/244d565ea67fbe5b70892f2ca7e87e79L.jpg?v=1791230065"},{"product_id":"pedders-06-09-pontiac-g8-front-sportsryder-struts-1","title":"Pedders 06-09 Pontiac G8 Front SportsRyder Struts","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586803597494,"sku":"PEDPED-9464R","price":194.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/d16779f2eab5265e80edd22243607675L.jpg?v=1791230066"},{"product_id":"pedders-urethane-diff-mount-kit-w-void-for-nvh-2009-2014-chevrolet-camaro","title":"Pedders Urethane Diff Mount Kit w\/ Void for NVH 2009-2014 CHEVROLET CAMARO","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ\/28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586804056246,"sku":"PEDPED-EP1167","price":102.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/d7cff8eca21d4bd6a716b90fb9ce919aL.jpg?v=1791230071"},{"product_id":"pedders-urethane-rear-crossmember-bush-insert-4-pkt-07-09-pontiac-g8-2014-chevy-ss","title":"Pedders Urethane Rear Crossmember Bush Insert (4 PKT) 07-09 Pontiac G8 \/ 2014+ Chevy SS","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586804121782,"sku":"PEDPED-EP1169","price":120.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/1e5a644d5b3c143a3df7a5f89a7a498bL.jpg?v=1791230072"},{"product_id":"pedders-urethane-rack-mount-bushes-2006-2009-g8","title":"Pedders Urethane Rack mount bushes 2006-2009 G8","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67586804252854,"sku":"PEDPED-EP2112","price":57.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/bfdbc3e3225b6298465854839f26acb3L.jpg?v=1791230074"},{"product_id":"pedders-10-12-chevrolet-camaro-w-narrow-sway-bars-90-115mm-adjustable-rear-sway-bar-endlink-kit","title":"Pedders 10-12 Chevrolet Camaro (w\/Narrow Sway Bars) 90-115mm Adjustable Rear Sway Bar Endlink Kit","description":"Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder.  For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between.  We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work.  Ride quality is subjective. Our test cars serve as daily drivers. As we do our R \u0026amp; D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling.  Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pedders","offers":[{"title":"Default Title","offer_id":67814012649654,"sku":"PEDPED-424479","price":156.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/6f68a8fe5a7a03606fac3af1f9c991f8L.jpg?v=1792979448"},{"product_id":"bmr-10-15-5th-gen-camaro-rear-lower-control-arms-non-adj-polyurethane-black-hammertone","title":"BMR 10-15 5th Gen Camaro Rear Lower Control Arms Non-Adj. (Polyurethane) - Black Hammertone | TCA028H","description":"The newly redesigned BMR lower control arms feature reinforced sway bar mounts that make them compatible with 2010-2011 FE3 suspension as well as the 2012+ Camaro FE4 suspension. The overall length has been shortened to correct camber on lowered vehicles. An additional 1\/4-inch of wheel clearance is also designed into the arms for 17-inch wheels. BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR's suspension!NOTE: TCA028 is not compatible with the factory rear sway bar end links. Part number ELK006 is required to retain the rear sway bar. Designed for lowered vehicles only. Use on OE height vehicles may not provide adequate camber adjustability. Due to shortened length of these control arms, adjustable toe rods are necessary when using this product.These arms require modification to be compatible with MRC equipped vehicles.BMR's suspensions TCA028 on-car-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ\/28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":67960751816886,"sku":"BMRTCA028H","price":425.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0241\/4133\/2557\/files\/0f88c081ef172b2927ebfecbd947ceebL.jpg?v=1793352785"}],"url":"https:\/\/merrickmotorsports.com\/collections\/pontiac-g8-suspension.oembed","provider":"Merrick Motorsports","version":"1.0","type":"link"}